Crown Sound Grabber Ii Pzm Condenser

Search For Crown Sound Grabber Ii Pzm Condenser at Amazon

The Crown Sound Grabber II is a Pressure Zone Microphone that works great with camcorders, picking up clearer sound than built-in microphones. Other uses include “no-fuss” music recording just place it on the floor near the musical ensemble. Because the PZM is placed on a flat surface, it doesn’t suffer from comb-filtering issues that take place with spot or room miking when sounds bounce of walls, ceilings, or floors. Powered by a 1.5V AAA battery, the Sound Grabber II includes a permanently attached cable with a 1/8″ phone plug. The microphone’s unbalanced output connects directly to a miniature cassette recorder. A 1/4″ phone-plug adapter is provided. The Crown Sound Grabber II is an modified version of the initial Sound Grabber. It utilizes the same Pressure Zone Microphone technology in which sound waves reinforce themselves in the area nearest a flat surface, commonly referred to as the “boundary.” Top recording engineers all over the world are using professional versions of the Crown PZM (Pressure Zone Microphone) to improve the quality of their recordings. The Sound Grabber II is one version of that technology, designed to meet the needs of the home or business recordist and fetch the gains of PZM engineering science within the reach of numerous more people. Because of this new technology, Sound Grabber II offers you the chance for tremendous betterment in the quality of your recordings. The Sound Grabber II will pick up sounds at distances you never thought possible with a clarity that other microphones, merely can not match, due to the limitations of their construction. The Sound Grabber II does not need to follow the action, since it has a wide-angle pickup pattern. So long as the mic “sees” the sound, in whatsoever direction or angle, it will pick it up clearly; it does not need to be amidst you and the other person. Speakers or vocalists may move freely around the Sound Grabber II without their tone quality altering due to the effects of comb filt

The Crown Sound Grabber II is a Pressure Zone Microphone for budget apps such as recording conferences and speeches. It works outstanding with camcorders, picking up clearer sound than built-in microphones. Other uses include “no-fuss” music recording just place it on the floor near the musical ensemble.

Powered by a 1.5V AAA battery, the Sound Grabber II includes a permanently attached cable with a 1/8″ phone plug. The microphone’s unbalanced output connects directly to a miniature cassette recorder. A 1/4″ phone-plug adapter is provided.

Technical Specifications

Frequency response (typical): 50 Hz to 16 kHz
Polar pattern: Hemispherical (half-omni) on a big surface.
Impedance: 1600 ohms, unbalanced.
Sensitivity: 20 mV/Pa (-54 fBV/Pa).
Power sensitivity: –42 dBm.
Cable: 10 foot with mini phone plug, 1/4″ phone plug and micro phone plug adapters
Power: One 1.5V AAA alkaline battery.

Most helpful customer reviews

6 of 6 people found the following review helpful.
WARNING: Plug incorrectly wired – once fixed, a good PZM mic
By I. Fetterley
These mics work well once you remove the mini-phono plug and install another similar plug. The design problem is that the shield is NOT connected to the metal case (ground). Nor is it connected to either side in the mic itself. If you carefully cut the plug plastic away with a razor blade, you can see the problem, but the end solution is to just replace the plug. If you use it without rewiring, it will be OK in places that have low AC noise, but will hum in most real recording environments. Given the way the plug is built and that 2 out of the 2 I ordered were identical, I suspect ALL of these units have this problem.

I have read reviews on this unit in the past that say it is junk, and I suspect this wiring flaw has been around for the life of this device, hence why the poor professional reviews. Once rewired, it works well – still is a non-balanced cable and therefore in high noise-field environments, it will not compete with professional grade equipment, but for recording of choirs or wide-stage omni-directional uses, it works well. I use them for opera recordings on small stages with good results.

5 of 5 people found the following review helpful.
Sound-Grabber-II Conference Microphone.
By R. Peffers
Excellent, fast service. The Sound-Grabber-II Conference Microphone is exactly what we needed for recording meetings. No problem transcribing. Can hear everything on the tape.

5 of 5 people found the following review helpful.
Easy!
By Rigby
We use this microphone for recording National Board teacher candidates and their classes. The sound is clear and the cord is long so you can move around a classroom easily. It’s easy to use and does the job!

See all 7 customer reviews…